Liquid waterproofing

High performance, fast curing, liquid applied, seamless protection

GCP liquid waterproofing products offer high performance with unique characteristics. Liquid waterproofing is cold-applied and cures quickly allowing construction sites to quickly return to full operation.

Documents

Liquid Waterproofing Product Documents

Product Name Product Data Sheet
ADPRUFE® AP3
Product Data Sheet
Products & Accessories

Products

  • Product Name
  • Description
  • Key Benefits
  • Applications Type
ADPRUFE® AP3
Description

ADPRUFE® AP3 is an innovative liquid admixture that significantly reduces the water absorption of concrete together with some effect on the reduction of drying shrinkage.

Key Benefits
  • Significantly reduced water absorption and penetration
  • Reduction in drying shrinkage
  • A low water-cement ratio
  • High slump, workable concrete mix for ease of placement
Application Type
  • Water-retaining structures
  • Swimming pools
  • Lift pits
  • Tunnels
SILCOR® 550 LS
Description

SILCOR® 550 LS is a high performance, polyurethane to provide a continuous, seamless, elastomer waterproof membrane.  SILCOR 550 LS is well suited for use in most areas of application in industrial and commercial design.  It is specially formulated for easy roller application of all permanently flexible, tough, waterproof barriers.

Key Benefits
  • Single component and easy application with brush and roller 
  • Simple, seamless, waterproof membrane
  • Excellent chemical resistance
Application Type
SILCOR® 560
Description

SILCOR® 560 is a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.

Key Benefits
  • Easy, fast, high build, one-coat application
  • Simple, seamless, fast-cure membrane.
  • Excellent chemical resistance
Application Type
  • Wet areas
  • External (non-exposed) - balconies, roof-decks, sill or window flashings, podiums, planters.
  • External (exposed) - non trafficable areas
SILCOR® 560 LS
Description

SILCOR® 560 LS a high performance, low odour, one-part, fast-curing, high solids, pure polyurethane elastomer waterproof membrane.

Key Benefits
  • Simple, seamless, fast-cure membrane.
  • Excellent chemical resistance
  • Waterproof
  • Permanently FLEXible
Application Type
  • Wet areas
  • Tanking
  • Horizontal application with self-leveling
SILCOR® 575
Description

SILCOR® 575 is a one-part, high performance, polyurethane membrane. When combined with SILCOR® Top Coat 80, provides a durable, UV-resistant, foot-trafficable waterproofing system for roofs, decks and plant rooms.

Key Benefits
  • Easy and low cost to install, maintain or refurbish
  • Quick access for trades
  • Waterproof
Application Type
  • Plant room floors
  • Balconies
  • Roof-decks
SILCOR® 580
Description

SILCOR® 580 is a tough, resilient, polyurethane elastomer-based layer rubber barrier giving long-life waterproof protection. It is a premium grade, low VOC elastomer using the latest technology to provide long-life, protective barriers to prestige construction projects.

Key Benefits
  • Long-life, permanently FLEXible
  • Total adhesion
  • Fully monolithic structure
Application Type
  • Exposed roofing, decks and podiums
  • Car parks and ramps
  • Compactor room floors, plant rooms and wash rooms
SILCOR® 780 HI-LP
Description

SILCOR® 780 HI-LP is a two-part, moderately fast-curing, hybrid polyurea, spray-applied elastomeric coating. It provides a premium quality, high build, long-life protective coating to concrete and metal substrates on major civil, infrastructure and commercial construction projects.

Key Benefits
  • Simple application
  • Long life
  • Slower cure provides smooth surface finish
Application Type
  • Water treatment plants
  • Roof decks
  • Podium slabs
SILCOR® 900MP
Description

SILCOR® 900MP is a premium performance two-component spray-applied seamless waterproofing membrane that cures within 2 minutes to form a high-strength, elastomeric, and fully-bonded waterproof membrane. Silcor 900MP is extremely durable with excellent wear and chemical resistance and does not normally require additional protection against mechanical damage.

Key Benefits
  • Seamless
  • Rapid-set
  • Robust
Application Type
  • Roofs
  • Podium decks
  • Terraces
SILCOR® 990MP
Description

SILCOR® 990MP is a two-part, fast-curing, pure polyurea, spray-applied elastomeric coating.

Key Benefits
  • Simple application
  • Potable water certified
  • Suitable for continuous immersion
  • Long-life
Application Type
  • Concrete and metal substrates on major civil, infrastructure and commercial construction projects
SILCOR® LM PU Sealant
Description

SILCOR® LM PU Sealant is a high performance elastomeric joint sealant based on proven polyurethane elastomer technology. SILCOR® LM PU Sealant is a neutral cure system that reacts on exposure to atmospheric moisture. When cured, it forms a durable waterproof seal, which makes it suitable for most applications.

Key Benefits
  • Good UV resistance, long life
  • Single-pack — no mixing
  • Low modulus for high movement
Application Type
  • Ideal for sealing joints in concrete panels, tiles, fibrous cement products, external cladding panels, block work and brickwork
SILCOR® Primer BS
Description

A fast-drying, single-pack, modified polyurethane primer for use with all polyurethane and polyurea based membranes.

Key Benefits
  • Strong physical bond to substrate
  • Fast-drying PU resin system
  • Coating is water-resistant and protects the structure in the event of interruption by wet weather
  • Promotes adhesion even in cold weather
Application Type
SILCOR® Top Coat 80
Description

SILCOR® Top Coat 80 is a tough, fast-curing, non-slip, aliphatic polyurethane coating designed for protection of SILCOR® membrane systems in exposed situations. SILCOR® Top Coat 80 is UV-resistant. It provides a durable, service foot-trafficable finish to roof and deck areas.

Key Benefits
  • Simple application, easy to use and fast-cure
  • UV-resistant and foot-trafficable
  • Fast-cure — quick access for trades
Application Type
  • Used for colour-stable, non-slip exposed areas on plant room and lift motor room, roofs, balconies, decks, perimeter turn-ups, penetrations and sill or window flashings
Overview

SILCOR®

SILCOR® is a high-performing cold-applied, seamless waterproofing system for podium decks, green roofs and terraces. The range of products include both spray and hand applied. The SILCOR® 900 series is generally foot-trafficable in under two hours, depending on application. The polymeric structure accommodates most designs without compromising waterproofing performance and while being fully compatible with other GCP waterproofing solutions.

ADPRUFE® 

ADPRUFE® is an innovative liquid admixture that significantly reduces both the permeability and drying shrinkage of concrete. When used in combination with ADVA® superplasticisers, this enhanced concrete performance reduces water absorption and penetration providing a significant reduction in drying shrinkage which produces fewer and thinner cracks.

SERVIDEK™ and SERVIPAK™

Designed specifically for deck waterproofing, SERVIDEK™ consists of a cold-applied waterproofing system that consists of a rubber/bitumen compound with a protection board, SERVIPAK™, applied on top. SERVIPAK™ is designed for heavy duty and is capable of accepting sand carpet and hot rolled asphalt. SERVIDEK™/SERVIPAK™ is both robust and fast-curing, with SERVIDEK™ serving as both a waterproofing membrane and an adhesive for SERVIPAK™. The combined system is able to accept road laying equipment in just four hours. Lastly, SERVIDEK™ conforms to irregularity in the substrate surface, while SERVIPAK™ allows indentation in the base coarse aggregate in order to provide resistance to braking.